Quick View
BFT “IGEA” Residential Swing Gate Operator
This model has great versatility thanks to the levers that permit installation on large sized pillars, opening up to 125 degrees. Maximum offset 12 inches (30 cm) Continue Reading BFT “IGEA” Residential Swing Gate Operator
Quick View
BFT “Phobos” Electro- Mechanical Swing Gate Operator Kit
Powered at 24V, this version has been specifically designed for simpler & faster installation in
compliance with the latest safety standards. Includes a universal control panel for one or two 24V motors with a one wire limit switch for each motor, quick wiring through plug-in terminal strips, LCD display, crush prevention by electronic torque self-adjustment, built-in 63 remotes rolling code receiver, optional serial control management, solenoid electric lock & battery backup.
ITEM #: BFT R935 Continue Reading BFT “Phobos” Electro- Mechanical Swing Gate Operator Kit
Quick View
Byan Swing Gate Operator Model 500 Residential
This residential operator is rated at 1500 lbs and can handle 60 cycles per hour. Opening speed is approximately 12 seconds and slows at the last 5-10 degrees of the swing.
ITEM #: BYAN 500 A Continue Reading Byan Swing Gate Operator Model 500 Residential
Quick View
Byan Swing Gate Operator Model 600 Residential/ Commercial
The 600 Series is a residential and medium-duty commercial operator for applicants that require 100 cycles per hour or less. It is ideal for uses that do not require continuous duty. Gate: 2000 lbs.
ITEM #: BYAN 600 A Continue Reading Byan Swing Gate Operator Model 600 Residential/ Commercial
Quick View
Byan Swing Gate Operator Model 800/900 Commercial
This operator can be used for most applications. The gate leaf is up to 16 feet. Opens with a 90 degree swing in 12 seconds & closes in 14 seconds. 800/900 Slow Speed Operator should be used in applications where the gate is over 16 feet & travels up or down a hill and/or if the gate frame flexes when reaching the end of travel. Can open with 90 degree swing in 17 seconds and close in 20 seconds. 800-900 Long is normally used in applications where gate is too large in diameter for normal mounting dimensions or where an insert cannot be mounted in the column. Can open a gate with a 90 degree swing in 12 seconds and close in 14 seconds.
ITEM #: BYAN 900 A Continue Reading Byan Swing Gate Operator Model 800/900 Commercial
Quick View
DKS DoorKing 6002 Swing Gate Operator
Operates on 24 Volt DC power and features built-in limit switches that precisely control the start/ stop speed and travel of your gate.
ITEM #: DK 6002-080 Continue Reading DKS DoorKing 6002 Swing Gate Operator
Quick View
Hy Security Swing Riser Gate Operator
The swing riser opens gates with an elegant lift and swing movement, raising the gate panel a full 12 inches during the gate opening cycle. The lifting clears obstacles such as snow, rocks, curbs, and gradient differences. The locking pin secures the gate as it drops into a roadway locking receptacle when the gate gently lowers at the end of its cycle. Continue Reading Hy Security Swing Riser Gate Operator
Quick View
Linear LRA Electro Mechanical Residential Swing Gate Operator
Is designed to open and close a light-duty residential swing gate. The operator can be used in left-hand or right hand swing gate installations on gates weighing up to 600 lbs.
ITEM #: LRR Single/ P B2 Continue Reading Linear LRA Electro Mechanical Residential Swing Gate Operator
